Yamaha yamaha digital sound projector ysp3300 User Manual

S/T

SETUP

RETURN

ENTER

X

See “Installing the IntelliBeam microphone” (

☞p. 23) for 

instructions on positioning the IntelliBeam microphone.

S/T key to select “BEAM” and 

X key.

S/T key to select “IntelliBeam” 

X key.

S/T key to select one of the 

X key.

Select Item: 
“BEAM+SOUND OPTIMIZE”
(Beam optimization and sound optimization)
Select this optimization feature if you make settings for the 
first time. This menu takes about 3 minutes.
“BEAM OPTIMIZE ONLY”
(Beam optimization only)
Use to optimize the beam angle so that the parameter best 
matches your listening environment. This menu takes about 
1 minute.
“SOUND OPTIMIZE ONLY” 
(Sound optimization only)
Use to optimize the beam delay, volume, and quality so that 
the parameters best match your listening environment. This 
menu takes about 2 minutes.
You must optimize the beam angle with “BEAM 
OPTIMIZE ONLY” before starting “SOUND OPTIMIZE 
ONLY”. Select this optimization feature in the following 
cases:
• If you have opened or closed the curtains in your 

listening room before using this unit

• If you have manually set the beam angle.

For the details on connecting IntelliBeam microphone, 
refer to “Using AUTO SETUP (IntelliBeam)” (

☞p. 24).

Follow steps 4, 5, and 6 under “Using 
AUTO SETUP (IntelliBeam)” to configure 
settings, and then remove the microphone.

The ENTER key performs the same function as the X key.

y