Enterasys Networks D2G124-12 User Manual
show vlanauthorization
D-Series CLI Reference 15-45
Mode
Switch command, read‐write.
Example
This example show how to clear VLAN authorization for all ports on slots 3, 4, and 5:
D2(rw)->clear vlanauthorization ge.3-5.*
show vlanauthorization
Displays the VLAN authentication status and configuration information for the specified ports.
Syntax
show vlanauthorization [port-string]
Parameters
Defaults
If no port string is entered, the status for all ports will be displayed.
Mode
Switch command, read‐only.
Example
This command shows how to display VLAN authorization status for ge.1.1:
G3(su)‐>show vlanauthorization ge.1.1
Vlan Authorization: ‐ enabled
port status administrative operational authenticated vlan id
egress
egress
mac address
------- -------- -------------- ----------- ----------------- -------
ge.1.1 enabled untagged
ge.1.1 enabled untagged
provides an explanation of command output. For details on enabling and assigning
protocol and egress attributes, refer to “
” on page 15‐43 and “
port‐string
(Optional) Displays VLAN authentication status for the specified ports. If
no port string is entered, then the global status of the setting is displayed.
For a detailed description of possible port‐string values, refer to “
no port string is entered, then the global status of the setting is displayed.
For a detailed description of possible port‐string values, refer to “
Table 15-50 show vlanauthorization Output Details
Output Field
What It Displays...
port
Port identification
status
Port status as assigned by set vlanauthorization command
administrative
egress
egress
Port status as assigned by the set vlanauthorization egress command
operational egress
Port operational status of vlanauthorization egress.