SVAT Electronics CLEARVU3 User Manual

now you can see

CLEARVU3

14

3.  Sensitivity: The  blue  bar  shown  on  the  Motion  Detection  screen  indicates  the  motion 
variation of the detection window. When the amount of motion detected exceeds the preset 

sensitivity threshold, it triggers motion detection recording. For example, if there is slight 

movement in your camera’s view (e.g. curtains blowing, shadows) you can decrease the 

sensitivity of that camera channel to avoid false triggering of motion record.

1.  QUALITY: LOW/ MEDIUM/ HIGH
2. 

AUDIO:

 

•   ON: Audio recording enabled.

 

•   OFF: Audio recording disabled.

3. 

DISK FULL: 

 

•   Overwrite: When the hard disk is full the system overwrites your oldest  

    recorded footage (recommended).

 

•   Stop: When the hard disk is full the system stops recording (message will 

 

   be displayed).

4.  POST ALARM:  Recording  time  after  an  event  (Alarm/  Motion  Detection)  has 

been triggered. 

5.  MANUAL: Set frames per second (FPS) for manual recording.

6.  CONTINUOUS: Set FPS for schedule continuous recording.

7.  MOTION DETECT: Set FPS for schedule motion detection recording.

8.  ALARM: Set FPS for schedule alarm recording (if you have alarm sensors wired 

into the DVR).

9.  DEFAULT: Reload the factory default setting.