Tascam CD-DJ1 User Manual

Page of 28
TASCAM  CD-DJ1
 
If the unit (or a compact disc) is moved from a cold 
to a warm place, or used after a sudden temperature 
change, there is a danger of condensation; vapor in 
the air could condense on the internal mechanism, 
making correct operation impossible.
Sleep function
If playback is paused and the unit has not been used 
for 30 minutes, the unit will automatically go to 
sleep, stopping the CD mechanism and turning off 
the backlight.
Attach the DC plug of the supplied AC adapter to the 
DC IN
 jack on the rear panel and connect the power 
plug to a standard electrical power outlet.
Pressing the 
POWER
 switch on the rear panel lights 
up the display. After a brief start-up screen, the home 
screen will appear.
Power supply
1- Introduction
Please use the CD-DJ1 only within its operating tem-
perature range of 5°C to 35°C (41°F to 95°F). Please 
avoid use or storage in dusty or humid environments 
because these conditions can cause malfunction.
To maintain top performance, and prolong operating 
life, observe the following notes, precautions and 
environmental conditions:
Avoid exposing it to extremes of temperature and 
humidity and avoid mechanical shocks.
Keep the unit away from strong magnetic fields 
(TV sets, computer monitors, large electric 
motors, etc.).
Relative humidity should be 30 to 90 percent.
As the unit may become hot during operation, 
always leave sufficient space above the unit for 
ventilation. Do not operate this unit in a confined 
space such as a bookcase, and do not put anything 
on top of the unit.

Avoid placing this unit on top of any heat-generat-
ing electrical device such as a power amplifier.
Always use the supplied AC adapter (PS-PS5) 
with the standard home electrical power out-
let. Use of other AC adapters may damage the 
CD-DJ1. 
Use the unit on a table or rack that is level and 
sturdy.
Wipe dirt from the unit with a dry cloth. Never 
use thinner, benzene or other solvents because 
they may cause acrylic parts and coated surfaces 
to dissolve, labels to be eroded or other damage.