Epson PhotoPC 850Z User Manual
7-6
Maintenance and Troubleshooting
L
Proof Sign-off:
BLE H.Kato E.Omori
F.Fujimori
SEI M.Kauppi
BLE H.Kato E.Omori
F.Fujimori
SEI M.Kauppi
R4C4410
Rev. C
Rev. C
A5 size
TRBLE.FM
2/11/00
Pass 3
Make sure the batteries are installed correctly. See
“Installing the batteries” on page 1-6. Also, make
sure you are using appropriate batteries and that
they are sufficiently charged. See “Replacing the
batteries” on page 1-8 and “Charging the
batteries” on page 1-5.
“Installing the batteries” on page 1-6. Also, make
sure you are using appropriate batteries and that
they are sufficiently charged. See “Replacing the
batteries” on page 1-8 and “Charging the
batteries” on page 1-5.
Your camera may not be compatible with local
television broadcasting standards. Select the
NTSC or PAL signal system to meet the television
broadcasting standards in your country. See
“Selecting the signal system and language” on
page 2-34.
television broadcasting standards. Select the
NTSC or PAL signal system to meet the television
broadcasting standards in your country. See
“Selecting the signal system and language” on
page 2-34.
Note:
Also, see your television documentation for possible
solutions.
Also, see your television documentation for possible
solutions.
You cannot take a picture with the camera when a
memory card is installed.
memory card is installed.
Check your camera’s LCD monitor for messages.
If you get a message indicating that you need to
format or eject the card. To format the memory
card, see “Formatting memory cards” on page 6-4.
To remove the card, see “Installing and removing
a CompactFlash Card” on page 1-10.
If you get a message indicating that you need to
format or eject the card. To format the memory
card, see “Formatting memory cards” on page 6-4.
To remove the card, see “Installing and removing
a CompactFlash Card” on page 1-10.
Your card’s memory may be full. Check the
picture counter on the display panel. If it reads 0,
the memory is full. In this case, change to another
card, erase some pictures using the LCD monitor,
or transfer the pictures to your computer and then
erase them.
picture counter on the display panel. If it reads 0,
the memory is full. In this case, change to another
card, erase some pictures using the LCD monitor,
or transfer the pictures to your computer and then
erase them.
Note:
To erase pictures with the LCD monitor, see “Erasing
photos” on page 3-5. To transfer pictures to your
computer before erasing them, see the EPSON Photo!3
User’s Guide.
To erase pictures with the LCD monitor, see “Erasing
photos” on page 3-5. To transfer pictures to your
computer before erasing them, see the EPSON Photo!3
User’s Guide.
Even after you take a picture, the number on the
display panel stays the same.
display panel stays the same.
This number shows how many more pictures you
can take. The number may not change, depending
on the image quality or complexity of the photos
you take.
can take. The number may not change, depending
on the image quality or complexity of the photos
you take.
You cannot copy software to or delete it from the
memory card.
memory card.
Make sure the memory card is installed correctly.
See “Installing and removing a CompactFlash
Card” on page 1-10, and reinstall the memory
card if necessary.
See “Installing and removing a CompactFlash
Card” on page 1-10, and reinstall the memory
card if necessary.