Petsafe PIF00-12917 User Manual
6 1-800-732-2677
www.petsafe.net 7
Note: In many
neighborhoods,
nearby property lines
may limit how large
the Pet Area can be.
Maximum 105 ft. range
(53 average steps)
PET AREA
Transmitter
How the System Works
The PetSafe
®
Stay + Play Wireless Fence
™
has been proven safe, comfortable, and effective
for pets over 5 pounds. The system works by transmitting a radio signal up to 105 feet in all
directions. You temporarily define the Pet Area with Boundary Flags for a visual aid in training
your pet. Your pet wears a Receiver Collar with Contact Points that touch his neck, and, once
trained, is allowed to roam freely in the Pet Area. When your pet reaches the Boundary Zone,
the Receiver Collar gives a warning tone before delivering a safe Static Correction through the
Contact Points to get his attention until he returns to the Pet Area.
Key Definitions
Transmitter: Transmits the radio signal and is the center of the Pet Area.
Pet Area: Distance from the Transmitter where your pet can roam freely.
Boundary Zone: 2 to 3 foot wide area outside the Pet Area
where your pet’s Receiver Collar will begin to tone and then
begin to deliver a Static Correction. The correction will start
in the Boundary Zone and continue anywhere beyond
the Pet Area. Note: The Receiver Collar is equipped with
a safety time-out feature that will stop correcting after
15 seconds if your pet remains outside the Pet Area.
Receiver Collar: Receives the radio signal from
Receiver Collar: Receives the radio signal from
the Transmitter.
Receiver Indicator Light: Indicates the level of
correction at which the Receiver Collar is set.
This light also indicates battery status.
Contact Points: Deliver the safe Static Correction
when your pet moves into the Boundary Zone.
Mode Button: Turns Receiver on/off and adjusts
the level of Static Correction your pet receives
outside the Pet Area.
Receiver Charger: Charges the batteries inside
the Receiver Collar
Receiver Charge Jack: Connection point for charging Receiver battery.
Power Light: Indicates when the Transmitter is on.
Power Jack: Where the Power Adapter plugs into the Transmitter. The Transmitter is powered by a standard
120-volt outlet.
Boundary Switch: Adjust according to the size of the Pet Area desired. Note: Adjusting the switch does not
change the level of Static Correction on the Receiver Collar.
Boundary Control Dial: Adjusts the distance from the Transmitter to the Boundary Zone. Note: Adjusting the
Boundary Control Dial: Adjusts the distance from the Transmitter to the Boundary Zone. Note: Adjusting the
dial does not change the level of Static Correction on the Receiver Collar.
Alarm Disable Button: Silences Transmitter Alarm
Alarm Disable Button: Silences Transmitter Alarm
Receiver Collar
Receiver
Indicator
Light
Contact
Point
Mode
Button
Receiver
Charge
Jack