Petsafe PIF00-12917 User Manual

 

www.petsafe.net 7 

Power 

Light

LO

W

HIG

H

Power 

Jack

Boundary 

Switch

Boundary 

Control Dial

LOW

HIGH

ALARM

ALARM

Alarm

Disable

Button

The Transmitter is located at the exact center of the Pet Area. Place the Transmitter:

• At least 2 feet above the floor located on the ground floor of your home.

• In a dry, well ventilated, protected area.

• In an area where temperatures do not fall below -10° F.

• On a non-metal table or other hard surface to ensure proper ventilation (1A).

• Do not place anything on top of Transmitter or cover any ventilation holes. This may 

overheat the Transmitter and cause early transmit failure.

• Do not place Transmitter in a closet or any other confined, unventilated area.

• At least 3 feet from large metal objects, as these items may reduce the size and shape of 

your Pet Area (1B). Placing the Transmitter inside a metal building or shed can reduce the 

maximum range of the Stay + Play Wireless Fence

™

.

You can mount on a wall (1A). A mounting template is included on the back of this guide.
The Transmitter has two built in warning alarms: a 

Power Loss Alarm and a Transmission Failure Alarm.
The Transmitter Power Loss Alarm sounds an 

intermittent tone alarm indicating power has been 

removed from the Transmitter. The Power Loss 

Alarm will last up to 30 minutes. In the event of a 

power loss, your pet is no longer contained.
There are 3 ways to turn off the Power Loss Alarm.

1.  Plug adapter into a functional 120-volt outlet.

2.  Unplug Transmitter power Adapter from the Power Jack located on the bottom of 

the Transmitter.

3.  Press the Alarm Disable button for 5 seconds then release. Three short tones will sound 

to signify the alarm has been turned off. 

The Transmission Failure Alarm makes a continuous tone indicating a Transmitter problem. 

In this situation, your pet can no longer be contained. Contact the Customer Care Center 

for a replacement at 1-800-732-2677.

1