Aleratec 260203 User Manual

www.aleratec.com

18

4.  Start the Copy Process.

a.  Insert your Master Disc and blank discs into their corresponding tray(s) and 

press the ENT button. You will see the following display:

b.  “Duplication Mode” offers three choices:

 ▪

Load and Copy

 ▪

On the Fly

 ▪

Prompt

Press UP or DOWN arrow button to display your desired mode. Press the 

ENT button to confirm.

c.  “No Counter” can be used when you prefer to copy continuously with no 

interruption. (It will still count the number of copies, but it will not notify 

you when to stop.) To select the “No Counter”, press ENT when you see 

the above screen. Then skip to step “d” on page 19 of this User Guide.

“Specify Counter” lets you to select the number of copies you want to 

make. The duplicator will count the number of copies you’ve made and 

prompt you when the desired number of copies has been completed. 

Press ENT button to select. Enter between 1 to 9999 copies. 

Enter a 4-digit number to specify the number of copies you want to make. 

To specify a number less than 4 digits, fill the leading spaces with “0”s 

(any leading “0” will be skipped). For example, “0234” will give you two 

hundred and thirty four copies, and “0010” will give you ten copies. 















