Aleratec 260203 User Manual

www.aleratec.com

20

Note: If either one of the PREVIOUS 2 screens are displayed for 
more than 2 minutes, please check your Master Disc or blank discs 
for quality.

d.  Allow 5-10 seconds for the duplicator to detect both your Master Disc and 

blank discs. After your Master Disc and blank discs have been recognized, 

you will see the following display:

Note: “X” indicates the number of discs recognized by the Writer 
Tray. For this example, number of discs could be up to 15.

Note: By default, the “Auto Start” setting is set to “Auto”. For 
example, if your duplicator has detected 3 blank discs and didn’t 
detect any additional blank discs within 30 seconds, the duplication 
will start automatically.

When the number of blank discs inserted matches the number of discs 

detected press ENT to confirm. You will see the following display:

Note: Give the duplicator 10-15 seconds to recognize all the blank 
discs. If the number of blank discs you inserted doesn’t match the 
number of discs detected...







