Ericsson bs120 User Manual

Not

r C

l Use

icsso

omm

ations

Setting other switchboard numbers

If the switchboard is part of a network of switchboards you
can call using multiple switchboards. In that case, there may
be more than one switchboard number in the number you dial.

Depending on the switchboards, pauses may be
necessary after the number of the switchboard has
been dialled. Using this function, you can set three
different switchboard numbers which occur
somewhere in the middle of a number you dial. If you
dial a number with the cordless phone, the home base
station will automatically insert a pause after you have
chosen one of the set numbers.

For example, if you have set ‘12’ as a switchboard
number, and ‘34’ as another switchboard number, and
you dial ‘123456’, then the home base station will
insert a pause after ‘12’ and after ‘34’.

Set other switchboard numbers as follows:

1. Press and then the R key for 2 seconds.

Four dashes are displayed.

2. Enter the PIN code for the home base station

(default is 1111).
Two dashes are displayed.

3. Enter 64.

The sequential number 1 is displayed together
with the first switchboard number.

A blank display means no numbers are set.

4. Enter the switchboard number.

You can delete the last digit with the C key.

5. Press the Up or Down key if you want to set a

switchboard number for the next sequential
number.

6. Press and then press .

The switchboard numbers are now set.