Bosch fw5 User Manual

en | Alarm

Camera Browser Interface

AM18-Q0605 | v5.0 | 2011.07

Software manual

Bosch Security Systems

In the event of an alarm, the camera can automatically connect 

to a pre-defined IP address. The camera can contact up to ten 

IP addresses in the order listed until a connection is 

established.

Select On so that the camera automatically connects to a pre-

defined IP address in the event of an alarm. Select Follows 

input 1 so that the device maintains the connection for as long 

as an alarm exists. 

Specify the numbers of the IP addresses to be contacted in the 

event of an alarm. The device contacts the remote locations one 

after the other in the numbered sequence until a connection is 

made.

For each number, enter the corresponding IP address for the 

desired remote station.

If the remote station is password protected, enter the 

password here.

Only ten passwords can be defined here. Define a general 

password if more than ten connections are required, for 

 >

 >

 >

 >

 

>

Alarm  Task  Editor