Bosch fw5 User Manual

Camera Browser Interface

Alarm | en

Bosch Security Systems

Software manual

AM18-Q0605 | v5.0 | 2011.07

example, when connections are initiated by a controlling 

system such as the Bosch Video Client or the Bosch Video 

Management System. The camera connects to all remote 

stations protected by the same general password. To define a 

general password:

1.

Select 10 in the Number of destination IP address list 

box.

2.

Enter 0.0.0.0 in the Destination IP address field.

3.

Enter the password in the Destination password field.

4.

Set the user password of all the remote stations to be 

accessed using this password.

Setting destination 10 to the IP-address 0.0.0.0 overrides its 

function as the tenth address to try.

If the device is operated behind a firewall, select TCP (HTTP 

port) as the transfer protocol. For use in a local network, select 

UDP.

To enable multicast operation, select the UDP option for the 

Video transmission parameter here and on the Network page.

In the event of an alarm, a larger network bandwidth is 

sometimes required for additional video streams (if multicast 

operation is not possible). 

Select an appropriate browser port depending on the network 

configuration. The ports for HTTPS connections are only 

available if the On option in SSL encryption is selected.

If a decoder device is used, select the analog video output to 

which the signal should be switched. If the destination device is 

unknown, select the First available option. This places the 

image on the first video output with no signal. 

The connected monitor only displays images when an alarm is 

triggered.