Oricom p80 User Manual

 
 

 

 

10

Predialing 
Pre-dial allows you to enter a telephone number and verify it on the screen 
before you place the call.  The screen displays the last 12 digits dialed but 
you can enter up to 20 digits.   
1.  Enter the phone number.     
2.  To enter a pause, press and hold  # .  A pause is displayed as “P”.   
3.  When you enter more than 12 digits,   turns on.  If you attempt to enter 

more than 20 digits, you’ll hear a reject tone. 

4.  If you make a mistake, press  

  to erase one digit at a time.  Or you 

can press  

   to clear the entire number and return the phone to 

standby. 

5. Press 

 

  to dial out the number.  

 
Dialing from a phonebook record 
1. Press 

.   during standby.   in the display turns on. 

2. Press 

 

  to search for the record that you would like to dial

.

  Or 

you can use the number keys to jump directly to the record starting with 
the corresponding letters of that key.   

3. Press 

 

  repeatedly will show the name and number of the record 

accordingly. 

4. Press 

 

  to dial out the number. 

 
Redialing the last dialed number 
1. Press 

 

.  The last number dialed is displayed. 

2. 

 turns on when the number contains more than 12 digits.  Press  

  

to view the off-page digits. 

3. Press 

 

  to dial out the number.   

 
 
During an external call 

 

 

The call timer will be displayed a short while after your call is connected.  It 
shows the duration of the call.  This timer is shown in minutes and seconds 
(MM-SS) in the first hour.  After that, it will be shown in hours and minutes 
(HH-MM) with the “-“ blinking to indicate the seconds. 

01-10