Oricom p80 User Manual

 
 

 

 

12

1.  When the handset receives a second call, the number of the caller 

appears on the display. It will display for 20 seconds or until you press a 
key on the phone. Press      listen for dial tone then Press 2 to put 

the current call on hold and talk with the second caller.   

2.  Subsequent presses of     listen for dial tone then Press 2 will toggle 

you between these 2 callers.   

 
Caller information of this second call will be stored in the call log. 
 
 
 

If you subscribe to the Caller ID service, your phone automatically stores the 
last 10 incoming calls.  Each record holds up to 20 digits.   
 
When the phone rings and caller information is received, the display will 
show the last 12 digits of the callers number.   If there is an identical phone 
number stored in the phonebook, that phonebook name will be displayed 
instead of the CID name. 
 
 
Reviewing CID records 
1. Press 

 

  when the phone is in standby.  If the call log is not 

empty, 

 turns on and the caller name of the most recent CID record is 

displayed.    

2. Press 

 

  to view the number.  

3. Press 

 

  again to see the date / time when the call was received.  

4.  Whether you are viewing the name, number or date/time, pressing 

     will display the next older record and     the next newer record. 

 
When 

 turns on, it means that received number is a new number.   

 
Call back from a CID record 
While you are viewing a CID record, you can return the call provided that it 
contains a valid phone number by pressing  

 .   

 
Saving a CID record to phonebook 
You can save a CID record into the phonebook provided that it contains a 
valid phone number and the phonebook is not full. 
While you are viewing the CID record that you would like to save, 
1. Press 

.