Sharp dv-rw2u User Manual
19
Basic Conneciton
Easy Connection
The following connection is the basic connection to watch or record TV programs.
To use cable box or satellite receiver, see “CATV or Satellite Receiver Connec-
tions” on page 21.
To use cable box or satellite receiver, see “CATV or Satellite Receiver Connec-
tions” on page 21.
Important!
• This recorder is equipped with copy protection technology. The playback
picture from this recorder will not appear correctly on your TV when you
connect this recorder to your TV via a VCR (or your VCR via this recorder) using
Video/Audio cables.
connect this recorder to your TV via a VCR (or your VCR via this recorder) using
Video/Audio cables.
• Be sure to turn off and unplug from the wall outlet this recorder and all
equipments before connecting the cables.
1
Connect the TV antenna
cable to the IN FROM
ANTENNA jack on the rear
of this recorder.
2
Connect the OUT TO TV
jack on the rear of this
recorder to the antenna
input jack on your VCR
using a coaxial cable.
NOTE
• If you connect this recorder directly
to your TV, skip the next step.
• The input signal to IN FROM
ANTENNA jack is passed through to
the OUT TO TV jack.
the OUT TO TV jack.
3
Connect the antenna
output jack on your VCR to
antenna input jack on your
TV using a coaxial cable.
4
Connect the VIDEO/AUDIO
output jacks on this recorder
to the VIDEO/AUDIO input
jacks on your TV using a
Video/Audio cable.
Be sure that the colors of the
jacks and plugs match up when
connecting the cable.
jacks and plugs match up when
connecting the cable.
NOTE
• To connect using S-Video or
component cables, see “Using
other types of video output” on the
next page.
other types of video output” on the
next page.
5
Connect the VIDEO/AUDIO
output jacks on your VCR
to the VIDEO/AUDIO input
jacks on your TV using a
Video/Audio cable.
Important!
• When using this connection, set
“PROGRESSIVE” in “PLAYBACK
SETUP” to “OFF”. (When the
setting is “ON”, the disc playback
picture cannot be viewed.)
SETUP” to “OFF”. (When the
setting is “ON”, the disc playback
picture cannot be viewed.)
After the Connection
Plug in the power cords of the TV and
VCR. Then go to “EZ Set Up” (see
page 23).
Plug in the power cords of the TV and
VCR. Then go to “EZ Set Up” (see
page 23).
COMPONENT
OUT
(480I/480P)
Y
P
B
P
R
IN FROM
ANTENNA
VHF/UHF/CATV
OUT TO TV
DIGITAL OUT
OPTICAL
IN 1
AUTO
REC
IN 3
OUT
R-AUDIO-L
VIDEO
S-VIDEO
LINE
TV
VCR
The Recorder
To antenna
input jack
To OUT TO
TV
To antenna
input jack
To antenna
output jack
To VIDEO/AUDIO
IN 1 jacks
To VIDEO/AUDIO
IN 2 jacks
Video/Audio
cable
(Commercially
available)
Coaxial cable
(Commercially available)
(Commercially available)
Coaxial cable
(Supplied)
(Supplied)
Antenna cable
Video/Audio
cable
(Supplied)
cable
(Supplied)
To VIDEO/AUDIO
output jacks
To VIDEO/AUDIO
output jacks
2
3
4
5
To IN FROM
ANTENNA
1
To Antenna/cable TV
wall outlet
wall outlet
DV_RW2U#p19-23.p65
03.1.14, 11:18 AM
19