Sharp viewcam vl-a110u User Manual

V L - A 1 1 0 U / p p .   0 2 6 - 0 3 9 ;   0 0 / 11 / 2 1 / 1 8 : 0 0

Press the REW (

C

) (or FF [

B

])

button.

• The tape rewinds (or fast forwards) to the

beginning of a scene immediately before
(or after) the current tape position;
playback then starts automatically.

To continue searching, press the REW
(or FF) button while “REW” (or “FF”) is
still displayed.

• Use this function when the tape is stopped or

being played back.

• This function finds the beginning of each scene

immediately before or after the current tape
position. It is not possible to skip a scene.

• This function cannot spot recordings that are

shorter than 10 seconds in length.

• In steps 2 and 4, if the tape is at a point ahead of

the last (or before the first) recording, the FF (or
REW) indicator will not appear.

The program search function automatically
finds and plays back the beginning of a
number of previously recorded scenes. Up to
10 different scenes can be found on one tape.

• This function does not work if no recording has

been made since the cassette was loaded, if the
cassette has been removed after the recordings
were made, or if the power source has been
interrupted.

Press the MENU button until 
appears (VCR mode).

Press the SEARCH button ( ).

• “PROG. SEARCH” is displayed and one

of or both “REW” and “FF” will start
flashing.

• To cancel, press the SEARCH button

again.

When using a tape with five different scenes.

First recording

Last recording

When you are at this position:
Press the REW button (

C) to rewind the tape to E and begin playback.

Press the FF button (

B) to forward the tape to R and begin playback.

Video tape

Beginning of each scene

Current tape position

Monitor display