Sharp viewcam vl-a110u User Manual

V L - A 1 1 0 U / p p .   0 2 6 - 0 3 9 ;   0 0 / 11 / 2 1 / 1 8 : 0 0

Use the counter memory feature when you
want to return to the beginning of a particular
scene. The position where the counter was
reset (0:00.00) is stored in memory to make it
easier to return to that point on the tape.

During playback, press the MENU
button until 

 appears.

• If “MEMORY” is not displayed, press the

COUNTER button.

Press the MEMORY button to set the
counter to Counter Memory mode.

• “M” will be displayed to the left of the

counter.

Press the REW button (

C

).

• The tape will automatically stop when the

counter reaches 0:00.00.

• The FF button (

B) can be used in the

same way.

• The tape may stop slightly ahead or behind

the point where you reset the counter to
“M 0:00.00”.

Press the PLAY button (

D

) to view the

desired scene.

During recording, press the MENU
button until 

 appears.

• If “MEMORY” is not displayed, press the

COUNTER button.

Perform steps 2 and 3 above.

When you are ready to finish recording,
press the REC START/STOP button.

Set the Power switch to VCR, then
perform steps 5 and 6 above.

Perform step 1 above, and press the MEMORY
button. “M” will disappear from the screen.

• This feature does not work during video search.

Press the RESET button to reset the
counter to zero at the beginning of the
scene that you want to return to later.

Press the MENU button until 
appears. When you are ready to finish
playback, press the STOP button (

A

).

Memory indicator