Epson EB-825 User Manual

A

The  Password  Protect  setting  menu  is  displayed.

Remote Control

q

• If  Password  Protect  is  already  activated,  you  must  enter  the

Password.
If  the  Password  is  entered  correctly,  the  Password  Protect  setting
menu  is  displayed.  s  "Entering  the  Password"  

• When  the  Password  is  set,  stick  the  Password  protect  sticker  in  a

visible  position  on  the  projector  as  a  further  theft  deterrent.

B

(1)

Select Power On Protect, and then press the [Enter] button.

(2)

Select On, and then press the [Enter] button.

(3)

Press the [Return] button.

C

(1)

Select User's Logo Protect, and then press the [Enter] button.

(2)

Select On, and then press the [Enter] button.

(3)

Press the [Return] button.

D

(1)

Select Network Protect, and then press the [Enter] button.

(2)

Select On, and then press the [Enter] button.

(3)

Press the [Return] button.

E

(1)

Select Password, and then press the [Enter] button.

(2)

The message Change the password? is displayed, select Yes and then
press the [Enter] button. The default setting for the Password is "0000".
Change this to your own desired Password. If you select No, the screen
shown in step 1 is displayed again.

(3)

While holding down the [Num] button, enter a four digit number using
the numeric buttons. The number entered is displayed as "* * * *". When
you enter the fourth digit, the confirmation screen is displayed.

Remote Control

(4)

Re-enter the Password.
The message Password accepted. is displayed.
If you enter the Password incorrectly, a message is displayed prompting
you to re-enter the password.

When  the  Password  entry  screen  is  displayed,  enter  the  Password  using
the  numeric  buttons  on  the  Remote  Control.