SMSC LAN9311 User Manual
Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
SMSC LAN9311/LAN9311i
83
Revision 1.4 (08-19-08)
DATASHEET
7.2
Port 1 & 2 PHYs
Functionally, each PHY can be divided into the following sections:
Note 7.1
Because the Port 1 PHY and Port 2 PHY are functionally identical, this section will describe
them as the “Port x PHY”, or simply “PHY”. Wherever a lowercase “x” has been appended
to a port or signal name, it can be replaced with “1” or “2” to indicate the Port 1 or Port 2
PHY respectively. All references to “PHY” in this section can be used interchangeably for
both the Port 1 & 2 PHYs. This nomenclature excludes the Virtual PHY.
them as the “Port x PHY”, or simply “PHY”. Wherever a lowercase “x” has been appended
to a port or signal name, it can be replaced with “1” or “2” to indicate the Port 1 or Port 2
PHY respectively. All references to “PHY” in this section can be used interchangeably for
both the Port 1 & 2 PHYs. This nomenclature excludes the Virtual PHY.
.
Figure 7.1 Port x PHY Block Diagram
HP Auto-MDIX
TXPx/TXNx
RXPx/RXNx
To External
Port x Ethernet Pins
Port x Ethernet Pins
10/100
Transmitter
10/100
Reciever
MII
MAC
Interface
MII
MDIO
Auto-
Negotiation
To Port x
Switch Fabric MAC
Switch Fabric MAC
To Host MAC
LEDs
PLL
PHY Management
Control
Registers
From
System Clocks Controller
System Clocks Controller
To GPIO/LED
Controller
Interrupts
To System
Interrupt Controller