Siemens SE105 User Manual
18
Configuring the local network
Gigaset Router / de / A31008-E105-B100-2-19 / configure_tcpip.fm / 05.06.2003
Network configuration for Windows 98, 98 SE, ME
To integrate a PC with Windows 98, 98 SE or ME in a local network via a Gigaset Router:
1. Set up the PC as Client for Microsoft Networks (see below).
2. Select computer names and workgroup (see page 19).
3. Install the TCP/IP protocol (see page 20).
4. Make TCP/IP protocol settings (see page 21).
5. Deactivate the http proxy (see page 25).
6. Synchronise the TCP/IP settings with the Gigaset Router (see page 26).
1. Set up the PC as Client for Microsoft Networks (see below).
2. Select computer names and workgroup (see page 19).
3. Install the TCP/IP protocol (see page 20).
4. Make TCP/IP protocol settings (see page 21).
5. Deactivate the http proxy (see page 25).
6. Synchronise the TCP/IP settings with the Gigaset Router (see page 26).
Setting up a PC as Client for Microsoft Networks
Before the PCs on your network can work together, you have to configure them as
Microsoft Network
s. This can be done as follows:
◆
Click on Start – Settings – Control Panel.
◆
Double click on the Network icon and then open the Network tab in the
Configuration window.
◆
Check whether the list of components contains the entry Client for Microsoft
Networks.
◆
If it is not there click on Add.
◆
Select as network component type Client and click on Add.