SMSC flexpwr lan8710 User Manual

MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and flexPWR

Technology in a Small Footprint

Datasheet

Revision 1.0 (04-15-09)

SMSC LAN8710/LAN8710i

DATASHEET

applications and in production testing, where the same register can be written in all the transceivers
using a single write transaction.

The MDC signal is an aperiodic clock provided by the station management controller (SMC). The MDIO
signal receives serial data (commands) from the controller SMC, and sends serial data (status) to the
SMC. The minimum time between edges of the MDC is 160 ns. There is no maximum time between
edges.

The minimum cycle time (time between two consecutive rising or two consecutive falling edges) is 400
ns. These modest timing requirements allow this interface to be easily driven by the I/O port of a
microcontroller.

The data on the MDIO line is latched on the rising edge of the MDC. The frame structure and timing
of the data is shown in

Figure 4.7

and

Figure 4.8

The timing relationships of the MDIO signals are further described in

Section 6.1, "Serial Management

Interface (SMI) Timing," on page 55

Figure 4.7 MDIO Timing and Frame Structure - READ Cycle

Figure 4.8 MDIO Timing and Frame Structure - WRITE Cycle

MDC

MDI0

Read Cycle

...

32 1's

...

D15

D14

Preamble

Start of

Frame

Code

PHY Address

Turn

Around

Data

Data From Phy

Data To Phy

MDC

MDIO

...