Sun Microsystems enterprise server 220r User Manual

Chapter 5

Replacing a Disk Drive

5. Using your thumb and forefinger, pinch the disk drive latch sideways to release

the drive handle.

Pull the handle away from the drive until you feel the drive connector disengage
from the backplane connector.

6. Holding the disk drive by the handle, slide it out of the drive bay.

Note –

When you reinstall the drive (or a replacement drive), be sure to install it

into the same drive bay as the one from which it was just removed.

7. Place the disk drive on an antistatic mat.

8. Repeat the procedure for the other drive (if necessary).

If you have finished removing and installing disk drives, remove the antistatic strap.