Epson stylus pro 9800 User Manual

  Slide the black paper stop off the end of  

the spindle.

 To use paper with a 3-inch core, attach the 

gray adapters to the paper stops at each end.  

See your Printer Guide for details. 

  Position the roll as shown, then slide it onto  

the spindle.

 

  Slide the black paper stop back onto the spindle and 

insert it firmly into the end of the roll.

  Open the roll paper cover.

  Place the roll paper in the printer as shown. (The 

black end of the spindle goes on the left.)

  Make sure the printer is turned on, then press the 

 Paper Source button until the   or 

 icon 

appears.

  Release the paper lever.

  Feed the paper into the slot and pull it all the way 

through.

Turn the roll back to remove any slack. Then align 
the bottom edge with the horizontal line and the 
right edge with the vertical line.

  Return the paper lever to the locked position. Then 

close the roll paper cover.

  Press the   Pause button. The paper feeds into 

printing position.

 To prevent creasing the paper, remove it 

from the paper path and roll it up when you’re not 

printing.

   

SP7898_QRGin_CPD20272.indd   1

8/5/05   10:15:28 AM