Epson stylus pro 9800 User Manual

  Open the front cover. (The cover has special tabs 

that act as paper supports when the cover is open.)

  Feed the posterboard into the paper slot until it 

meets resistance.

If you’re using stock more than 39 inches 

long (Epson Stylus Pro 9800 only), load it long edge 

first (in landscape orientation).

  Align the board with the mark on the roll paper 

cover.

  Return the paper lever to the locked position. Then 

close the front cover.

  Press the   Pause button. The board feeds into 

the printing position automatically and 

READY 

appears on the control panel.

  Run your print job. After it is finished, the 

posterboard stays in the printer.

  To remove the print, hold it and release the 

paper lever.

SP7898_QRGin_CPD20272.indd   3

8/5/05   10:15:29 AM