Alliance Laundry Systems sf50pv User Manual

Page of 119
Safety
8
F232058
Safe Operating Environment 
(Continued)
Always disconnect power and water supplies 
before a service technician performs any 
service procedure. Where applicable, steam 
and/or compressed air supplies should also be 
disconnected before service is performed.
AC Inverter Drive
Machines equipped with the AC inverter drive 
require special attention with regard to the 
operating environment.
• An especially dusty or linty environment 
will require more frequent cleaning of the 
AC inverter drive cooling fan filter and of 
the AC inverter drive itself.
• Power line fluctuations from sources such 
as uninterruptible power supplies (UPS) 
can adversely affect machines equipped 
with the AC inverter drive. Proper 
suppression devices should be utilized on 
the incoming power to the machine to 
avoid problems.
• A clean power supply free from voltage 
spikes and surges is absolutely essential for 
machines equipped with the AC inverter 
drive. Nonlinear inconsistencies (peaks and 
valleys) in the power supply can cause 
the AC inverter drive to generate 
nuisance errors.
If voltage is above 230V for 200V 
installations or above 440V for 400V 
installations, a buckboost transformer is 
recommended. If voltage is above 240 or 
480, a buckboost transformer is required.
• Sufficient space to perform service 
procedures and routine preventive 
maintenance is especially important for 
machines equipped with the AC 
inverter drive. 
Misuse
Never use this machine for any purpose other 
than washing fabric.
• Never wash petroleum-soaked rags in the 
machine. This could result in an explosion.
• Never wash machine parts or automotive 
parts in the machine. This could result in 
serious damage to the basket.
• Never allow children to play on or around 
this machine. Death or serious injury can 
result if children become trapped in the 
machine. Do not leave children unattended 
while the machine door is open. These 
cautions apply to animals as well.
Ensure that a ground wire from a proven 
earth ground is connected to the ground lug 
near the input power block on this machine. 
Without proper grounding, personal injury 
from electric shock could occur and machine 
malfunctions may be evident. 
SW008
WARNING