Alliance Laundry Systems sf50pv User Manual

10

F232058

The doorbox contains the Hall-effect door-
closed sensor, door-open sensor, and the 
door-unlock solenoid.

Electromechanical valves control water flow 
into the washer-extractor.

A red emergency stop button is located on the 
right side of the machine front. Push the button 
to stop the machine.

The washer-extractor is equipped with the 
following wet clean capable features: One-half 
wash speed allows gentle mechanical action 
during wash. Eight supply signals provide not 
only normal laundering signals to dispense 
detergents, bleaches, softeners, sours, etc., but 
also chemicals unique to wet clean processing. 

Upon delivery, visually inspect crate, 
protective cover, and unit for any visible 
shipping damage. If the crate, protective 
cover, or unit are damaged or signs of possible 
damage are evident, have the carrier note the 
condition on the shipping papers before the 
shipping receipt is signed, or advise the carrier 
of the condition as soon as it is discovered.

Remove the crate and protective cover as soon 
after delivery as possible. If any damage is 
discovered upon removal of the crate and/or 
protective cover, advise the carrier and file a 
written claim immediately.

If literature or replacement parts are required, 
contact the source from whom the machine 
was purchased or contact Alliance Laundry 
Systems at (920) 748-3950 for the name of the 
nearest authorized parts distributor.

For technical assistance, call any of the 
following numbers:

(850) 718-1035
(850) 718-1026

Marianna, Florida

(920) 748-3121

Ripon, Wisconsin

A record of each machine is on file with the 
manufacturer. The serial number decal is 
located at the rear of the machine. Figure 1 
shows the location of the serial number on the 
decal. Always provide the machine’s serial 
number and model number when ordering 
parts or when seeking technical assistance.