Alliance Laundry Systems sf50pv User Manual

48

F232058

Figure 29

4. Remove back panel and check overflow 

hose and drain hose for leaks.

5. Clean inlet hose filter screen: 

a. Turn water off and allow valve to cool, 

if necessary. 

b. Unscrew inlet hose and remove

filter screen. 

c. Clean with soapy water and reinstall. 

Replace if worn or damaged.

6. Unlock the hinged lid and check the 

supply dispenser hoses and hose 
connections.

7. Tighten motor mounting bolt locknuts and 

bearing bolt locknuts, if necessary.

8. Use compressed air to clean lint

from motor.

9. Clean interior of machine, both basket and 

shell, by wiping with a water-soaked 
sponge or cloth.

10. Use compressed air to ensure that all 

electrical components are free of moisture 
and dust.

Disconnect power to the machine 

before performing the quarterly maintenance 
procedures.

1. Tighten door hinges and fasteners, 

if necessary.

2. Tighten anchor bolts, if necessary.

3. Check all painted surfaces for bare metal. 

(Matching gray paint is available from 
the manufacturer.)

• If bare metal is showing, paint with 

primer or solvent-based paint. 

• If rust appears, remove it with 

sandpaper or by chemical means. 
Then paint with primer or solvent- 
based paint. 

4. Clean steam filter, where applicable.

a. Turn off steam supply and allow time 

for the valve to cool.

b. Unscrew nut.

c. Remove element and clean.

d. Replace element and nut.

5. Inspect suspension components for wear 

or corrosion. Observe the operation of the 
machine to ensure proper tension and 
operation of the suspension system.

6. If the washer-extractor is equipped with 

one of the tilt options, inspect fasteners 
between the tilt mechanism and washer-
extractor for corrosion. Verify that the 
fasteners are securely tightened.

Driven

Drive Pulley

Motor

Pulley

Straightedge