Adam Equipment cbw 30 User Manual

6.6.1 Setting up Check-weighing while weighing 
 

• Press [Limit]. It will show the current High Limit with the left most 

digit flashing and the HI symbol on the left of the display.  

 

•  To select the digit to be changed press [Limit/Î] or [%/Í].  Use 

Ï]

 to increment the flashing digit.  When the desired value 

is shown press [Zero/Enter] to accept the value.  If you want to 
reset the value to zero, press the [Func/C] key to clear the value. 

 

• After pressing [Zero/Enter] the display will then show the Low 

Limit, the “LO” symbol will be on to the left side of the display. 
Enter the low limit in the same way the high limit was entered.  

 

•  The limits are displayed in Kg.  

 

• Pressing the [Zero/Enter] key will return the scale to weighing, 

with the Check-weighing function enabled. 

 

•  When a weight is placed on the scale the arrows will show 

whether the weight is above or below the limits and the beeper 
will sound as described below. 

 

BOTH LIMITS SET  The display will show OK and the beeper will sound 

when the weight is between the limits. 

LOW LIMIT SET 
 

HIGH LIMIT is set to zero. 
The display will show OK and the beeper will sound 
when the weight is less than the Low Limit.  Above 
the Low Limit the display will show HI and the beeper 
will be off. 

HIGH LIMIT SET 

LOW LIMIT is set to zero. 

The display will show LO and the beeper will be off 
when the weight is less than the High Limit.  Above 
the High Limit the display will show OK and the 
beeper will be on. 

BOTH LIMITS SET 
LOW IS SET 
GREATER THAN 
HIGH 

The beeper will never sound and the display will show 
LO

 if the weight is less that the Low Limit and HI if the 

weight is greater than the Low Limit. 

11