Adam Equipment cbw 30 User Manual

C. When in parts counting mode, the weight, unit weight and count will be

printed-

GS 1.234 kg

GS for Gross weight, NT for net weight
and a unit of weight

U.W. 12.34 g/pcs

The average piece weight computed by
the scale

PCS 100 pcs

The number of parts counted

Includes 2 line feeds

D. When recalling the Total weight stored in the accumulation memory the

output format is-

***************

A line of stars is shown

<lf>

Includes 1 line feed

TOTAL No. 5

Wt 21.456kg

The total value stored in memory

***************

9.1 INPUT COMMANDS FORMAT

The scale can be controlled with the following commands. The commands
must be sent in upper case letters, i.e. “T” not “t”. Press the Enter key of the
PC after each command.

T<cr><lf>

Tares the scale to display the net weight. This is the same as pressing [Tare].

Z<cr><If>
Sets the zero point for all subsequent weighing. The display shows zero.

P<cr><lf>

Prints the results to a PC or printer using the RS-232 interface. It also adds the value to
the accumulation memory if the accumulation function is not set to automatic.