Epson CPD-9992 User Manual
43
■
■
■
Turn off
High Speed
printing in the
Advanced dialog box.
Your printout is blurry or smeared.
■
Make sure your paper isn’t damp or loaded
face down (the printable side should be
loaded face up).
face down (the printable side should be
loaded face up).
■
Use a support sheet with special paper or
try loading your paper one sheet at a time.
try loading your paper one sheet at a time.
■
Make sure your paper or media meets the
specifications listed in your electronic
Reference Guide.
specifications listed in your electronic
Reference Guide.
■
Run the Print Head Alignment utility. See
page 35 for instructions.
page 35 for instructions.
■
Check the paper thickness lever position.
If it’s in the + position, your printer is set
for thicker paper or envelopes and your
image may smear. For most papers, set the
paper thickness lever to the 0 position, as
shown to the left.
If it’s in the + position, your printer is set
for thicker paper or envelopes and your
image may smear. For most papers, set the
paper thickness lever to the 0 position, as
shown to the left.
Your printout is faint or has gaps in the
image.
image.
■
■
Check the control panel lights to see if the
ink cartridges are low on ink. To replace
an ink cartridge, see page 30.
ink cartridges are low on ink. To replace
an ink cartridge, see page 30.
■
Make sure the
Media Type
setting
matches the paper you loaded. See page 26
for guidelines.
for guidelines.
■
Make sure your paper isn’t damaged, old,
dirty, or loaded face down (the printable
side should be loaded face up).
dirty, or loaded face down (the printable
side should be loaded face up).
Pbasics.book Page 43 Friday, March 10, 2000 2:49 PM