Epson PowerLite 700 User Manual
Remote Control Map
Where to get help
Internet support
Visit Epson’s support website at
epson.com/support and select your
product for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson with your
questions.
Speak to a support representative
To use the Epson PrivateLine
®
Support service, call (800) 637-7661 and enter
the PIN on the Epson PrivateLine Support card that came with your projector.
This service is available 6
AM
to 6
PM
, Pacific Time, Monday through Friday,
for the duration of your warranty period. You may also speak with a projector
support specialist by dialing one of the following numbers. (Toll or long distance
charges may apply.)
U.S.: (562) 276-4394, 6
AM
to 6
PM
, Pacific Time, Monday-Friday
Canada: (905) 709-3839, 6
AM
to 6
PM
, Pacific Time, Monday-Friday
Days and hours of support are subject to change without notice.
Purchase supplies and accessories
You can purchase screens and other accessories from an Epson authorized
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
Or you can purchase online at
www.epsonstore.com (U.S. sales) or
www.epson.ca (Canadian sales).
6
Adjust the image
1
To raise the image, press the foot release lever and lift the front of
the projector. Release the lever to lock the foot in position.
2
Rotate the focus ring to sharpen the image. To reduce or enlarge
the image, rotate the zoom ring.
3
If your image looks like
or
, first make sure the projector
is facing the screen squarely. Then, if necessary, press the
and
buttons on the projector’s control panel until the image looks
correct.
4
To select the best color mode, press the
Color Mode button
on the remote control. Press it repeatedly to move through the
options.
5
If the image is stretched or cut off, press the
Aspect button until
the image looks correct.
See your User’s Guide on the CD-ROM for more information about
image adjustments.
7
Install User’s Guide and
register your projector
register your projector
1
Insert the projector CD-ROM in your drive. If the installer doesn’t
open automatically, double-click the
Epson CD-ROM icon, then
double-click the
Epson installer icon.
2
Select
English.
3
Follow the instructions on the screen to register.
NOTE
You can also register at www.epson.com/webreg.
4
After you register the projector, click
User’s Guide to install it.
(If you are using Windows and don’t already have Adobe
®
Reader
®
, click
Adobe Reader and follow the on-screen
instructions to install it.)
5
When you’re done, click
Exit.
To open your User’s Guide, double-click the
PL HC700 User’s Guide
icon on your desktop.
Epson and Instant Off are registered trademarks and Epson Exceed Your Vision is
a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are
registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only
and may be trademarks of their respective owners. Epson disclaims any and all rights in
those marks.
This information is subject to change without notice.
© 2008 Epson America, Inc. 7/08
Printed in XXXXXX
a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are
registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only
and may be trademarks of their respective owners. Epson disclaims any and all rights in
those marks.
This information is subject to change without notice.
© 2008 Epson America, Inc. 7/08
Printed in XXXXXX
CPD-26345
Troubleshooting
If you see a blank screen
If you see a blank screen or the
No signal message after turning on
your computer or video source, check the following:
Make sure the
power light on the projector is green and not
flashing and the
A/V Mute slide (lens cover) is open.
Make sure the cables are connected correctly. (See the User’s Guide
for more information.)
If you’ve connected more than one video source, you may need to
press the
Source Search button on the projector or the Search
button on the remote control to select the one you want to watch.
(Allow a few seconds for the projector to sync up after pressing it.)
If the picture is taller on one side
The projector is set at an angle to the screen. Face it squarely toward
the screen.
Zoom ring
Focus ring
Color Mode button
Aspect button
Search and individual Source
selection buttons
A/V Mute button
Turns off image
Power button
Auto button
Resets tracking,
sync, and position
Aspect button
Changes screen size
Page Up/Down buttons
Control PowerPoint
®
slides
(USB cable required)
E-Zoom +/– buttons
Zoom into image details
Menu button
Accesses menus
Freeze button
Stops image
Color Mode button
Changes display mode
Num button
Activates number buttons
Help button
Displays help menus
Volume buttons
Adjust volume
Esc button
Exits menus
Menu navigation buttons
and Enter button