Adtran MX2800 M13 User Manual

9-20    

61200290L1-1G

Section 9, Transaction Language 1 (TL1)

MX2800 M13 Multiplexer User Manual

The data dictionaries that follow are to be used while performing TL1 editing or retrieve commands. Each 
data dictionary contains four columns. The columns are as follows:

• Keyword gives the values to be placed in the <keyword> portion of the edit command.

• Type describes the type of <value> that is required to be entered in the edit command.

– ENUM requires a text and/or number string to be entered as the <value>.

– Y/N requires a 

Y

 or 

N

 representing yes or no to be entered as the <value>.

– INT requires that an integer be entered as the <value>.

• Domain describes valid entries that may be entered into the <value> portion of the edit command.

• Description explains each of the edit or retrieve commands.

 contains entries that are used to edit or retrieve options for the DS3 portion of the MX2800. 

When performing TL1 edit commands from this table, the value of 

rr

should be T3, and the 

<aid>

 value 

should be one of the following:

• 300 for all DS3 Circuits

• 301 for DS3 #1

• 302 for DS3 Control Card A

• 303 for DS3 Control Card B

ACTIVECONTROLLER

ENUM

One of the following:
• A
• B

Selects which controller card is active
• controller card A is active
• controller card B is active

CARDSWRLY

Y/N

Y or [N]

Identifies status of System Protection Switch 
alarm relay
• Yes (Y) - enables alarm
• No (N) - disables alarm

DIAGDS3

ENUM

One of the following:
• DATAMODE
• LINELPBK
• DIGLPBK
• METLPBK
• REMLPBK
• ALLT1

Enables the selected DS3 loopback
• Refer to 

• Refer to 

• Refer to 

• Refer to 

• Refer to 

• Refer to 

DS3AISRLY

Y/N

Y or [N]

Identifies status of DS3 AIS alarm relay
• Yes (Y) - enables alarm
• No (N) - disables alarm