Adtran MX2800 M13 User Manual
MX2800 M13 Multiplexer User Manual
Configuration, Section 3
61200290L1-1G
3-37
Equipment Codes
The Equipment Code
supports 10 alpha-numeric characters and provides user-configurable text strings to
identify the MX2800 over the network.
Syslog Setup
These selections include Transmission, Host IP Address, Severity Level, and Host Facility.
Transmission
This option enables or disables the transmission of log events to the external Syslog server. The host IP
address must be defined first.
address must be defined first.
Host IP Address
This option specifies the IP address of the external server that is running the Syslog host daemon.
Severity Level
This option specifies the lowest level of severity that causes messages to be logged to the Syslog server.
The levels are listed in
The levels are listed in
in order of decreasing severity. Any message at or above a selected sever-
ity level will be logged if a transmission is enabled.
Host Facility
This option specifies the facility destination of log events. Facilities are located on the host and are
managed by the Syslog host daemon running on either a UNIX machine or a PC. Options include
managed by the Syslog host daemon running on either a UNIX machine or a PC. Options include
Local 0-
7
.
Table 3-6. Syslog Severity Levels
Level
Description
Emergency
The system is unusable.
Alert
An action must be taken immediately.
Critical Shows
critical
conditions.
Error Shows
error
conditions.
Warning Shows
warning
conditions.
Notice
Shows normal but significant conditions.
Info
Shows informational messages.
Debug
Shows a debug-level message.