Auerswald 4410 USB User Manual
Settings
27
You are in need of an analog DTMF telephone, an ISDN tele-
phone with DTMF signalling or a DTMF sender.
phone with DTMF signalling or a DTMF sender.
The PBX has to be configured correspondingly with the configuration
program COMset.
program COMset.
You must have knowledge of the remote switching and programming
MSN/DDI and the external password programmed with the configura-
tion program COMset.
MSN/DDI and the external password programmed with the configura-
tion program COMset.
If you have started the programming as described here by calling the
PBX and enter the correct external password, you will hear the external
PBX and enter the correct external password, you will hear the external
acknowledgement tone. Then you can configure all the subscriber Call
Forwarding settings. After successful programming you will hear the
external acknowledgement tone again and may hang up or make fur-
ther setting.
Forwarding settings. After successful programming you will hear the
external acknowledgement tone again and may hang up or make fur-
ther setting.
If you are waiting too long with the code input or enter a wrong code,
you will hear a busy tone. In this case please hang up the receiver and
try again.
you will hear a busy tone. In this case please hang up the receiver and
try again.
Programming Subscriber Call Forwarding via an external Telephone if you are „Out of Office“
b M
f
7 W f
Start external Programming
external
telephone
telephone
remote switching and
programming MSN/DDI
programming MSN/DDI
tone
(1 sec)
(1 sec)
continue
with DTMF
with DTMF
external
password
password
external acknowledgement tone
(1 sec continuous tone)
(1 sec continuous tone)
12 1
n
*n # f
Switch on subscriber Call
Forwarding with entry of an
internal subscriber telephone
number as destination
„CF unconditional“
(for „CF on busy“ 13 instead of 12 and
for „CF on no Reply“ 14 instead of 12)
(for „CF on busy“ 13 instead of 12 and
for „CF on no Reply“ 14 instead of 12)
internal number of
the target telephone
the target telephone
star and internal
number of the tel-
ephone to be for-
warded
number of the tel-
ephone to be for-
warded
external
acknowledgement
tone (1 sec
continuous tone)
acknowledgement
tone (1 sec
continuous tone)
or
0r
Switch on subscriber Call
Forwarding with entry of an
external telephone number as
destination
Exchange Line
Access Number and
external number of
the target telephone
Access Number and
external number of
the target telephone
or
k
Switch on subscriber Call
Forwarding with entry of a
Short-Code Dial Number as
destination
Short-Code Dial
Number of the
target telephone
Number of the
target telephone
12 1 * n
# f
Switch on subscriber Call
Forwarding without entry of a
telephone number because number
has already been saved
„CF unconditional“
(for „CF on busy“ 13 instead of 12 and
for „CF on no Reply“ 14 instead of 12)
(for „CF on busy“ 13 instead of 12 and
for „CF on no Reply“ 14 instead of 12)
star and internal number of the
telephone to be forwarded
telephone to be forwarded
external
acknowledgement
tone (1 sec
continuous tone)
acknowledgement
tone (1 sec
continuous tone)
12 0 * n
# f
Switch off subscriber Call
Forwarding
„CF unconditional“
(for „CF on busy“ 13 instead of 12 and
for „CF on no Reply“ 14 instead of 12)
(for „CF on busy“ 13 instead of 12 and
for „CF on no Reply“ 14 instead of 12)
star and internal number of the
telephone to be forwarded
telephone to be forwarded
external
acknowledgement
tone (1 sec
continuous tone)
acknowledgement
tone (1 sec
continuous tone)
20 n
# f
Switch off all active subscriber Call Forwarding settings tor
this phone
internal number of the
forwarded telephone
forwarded telephone
external
acknowledgement
tone (1 sec
continuous tone)
acknowledgement
tone (1 sec
continuous tone)
☞