Pitney Bowes DM1000 User Manual

If the attached scale is particularly sensitive, run this mode with the Auto-

scale feature set to Off. This will prevent the system from automatically 

reverting to Attached Scale mode when WOW® mode is in use.
Use this option If the AutoScale feature is set to Off. See Set Up Scales/
Rates: AutoScale 

in Chapter 5 in this guide. 

1. Press the Mode key. 

2. Select Attached Scale. The “Attached Scale Mode” screen appears.

3. Place the piece of mail on the scale.

4. If the class displayed in this screen is incorrect, press the Class key 

and select the class. For more information, refer to “Selecting the 
Class, Carrier, Special Services or Options” 

 in this chapter.

5. If this is a package, press the Tape key, otherwise go to step 6.

6. Place the piece of mail on the feed deck.

7. Press the Start key. 

8. If you are using the optional Power Stacker, we recommend you 

remove your mail in manageable stacks and not allow the deck to fill 

completely. The system will halt the stacker if it is filled to its maximum 

capacity.

Seal Only Mode allows you to seal envelopes without applying postage. If 

you are running accounting, and you select Seal Only Mode, you will be 

prompted to select an account to track the pieces against. 
When you view or print an accounting report, “Seal Only” will appear in the 

Class column if the pieces were processed in Seal Only mode.
1. Press the Mode key. 

2. Select Seal Menu and then select the appropriate option.

3. Select the Reset Counter option if you want to clear the number of 

pieces of mail fed into the machine in the seal only mode. 

4. Place the mail on the feed deck. 

5. Press the Start key.

6. If you are using the optional Power Stacker, we recommend you 

remove your mail in manageable stacks and not allow the deck to fill 

completely. The system will halt the stacker if it is filled to its maximum 

capacity.

  Make sure you center the mail on the scale and 

check to be sure it is not touching any other surface or object. 

 For additional sealing options, press the Seal key on the IntelliLink® 

Control Center. This allows you to select the following options:

•

Sealer and Print

•

Seal Only

•

Print 

O

nly

•

Adjust Wetness*

*For more information, refer to the 

 section in 

Chapter 9 of this guide.