Philips d350 User Manual

A.

Removable Shaving Head

B.

Shaving mini-foil

C.

Protective Cap

D.

Specialty Hi-Definition Trimmer

E.

On/Off Switch

F.

Charging Indicator Light

G.

Power Cord Socket

H.

Power Cord

I.

Adaptor

J.

Cleaning Brush

K.

Full Two-Year Warranty

L.

60-Day Money-Back Guarantee

◗ (Re)charging requires 10 full hours.
◗ Use only the cord provided.
◗ Battery performance is best if you recharge

only when the battery is (almost) completely
empty.

◗ Charging or recharging at temperatures below

40˚F or higher than 95˚F adversely affects
lifetime of the battery.

◗ Continuously recharging Shaper will reduce

life of battery.

Be certain Shaper is OFF.

Connect the power cord
plug to Shaper (Fig. 1).

Do not charge Shaper for more than 24 hours.

Plug adaptor into any 120V AC outlet.
Use only the cord provided.

Green Charging Indicator
Light on the adaptor will
go on to indicate the
Shaper is charging (Fig. 2).
A full charge takes
approximately 10 hours
for up to 40 minutes of 
cordless operation.

Remove the adaptor from the electrical
outlet and disconnect the power cord
plug from the Shaper.

When the battery is empty, recharge the

appliance for 10 hours. The Shaper does
not operate directly from the electrical
outlet. If you want to style your facial
hair when the battery is empty, charge
the appliance at least 90 minutes to
ensure enough power for the one styling
session.

After the Shaper has been charged for the
first time, do not recharge it between styling
sessions. Continue using it until the battery is
almost completely empty.

◗ Discharge the battery completely twice a year

by letting the motor run until it stops. Then
recharge the battery for at least 10 hours.

◗ Do not charge the appliance for more than

24 hours.

◗ Do not keep cord permanently plugged into

the electrical outlet.

◗ If Shaper hasn’t been used for a long period

of time, it must be recharged for a full 10
hours.

6

5

4

3

2

1

Name

Address

City

State            Zip

Daytime Telephone No. (           )

Email Address:

REASON FOR  RETURNING:

If you are not fully satisfied with your Norelco D-Finer
Precise Shaper, send the product back and we’ll refund
you the full purchase price.

Send dated sales receipt, your complete name and
address as indicated below, and the D-Finer Precise
Shaper, prepaid to:

Please allow 4-6 weeks for delivery of check.

AREA CODE

When using an electrical appliance, basic safety
precautions should always be followed, including
the following:

To reduce the risk of electric shock:
1. Do not reach for a Shaper that has fallen

into water. Unplug immediately.

2. Do not use while bathing or in a shower.

3. Do not place or store Shaper where it can

fall or be pulled into a tub or sink. Do not
place in or drop into water or other liquid.

4. Always unplug this Shaper from the electrical

outlet immediately after using, except when
Shaper is (re)charging.

5. Unplug Shaper before cleaning.

6. When discarding Shaper, unplug Shaper and

remove rechargeable battery. See Battery
Removal instruction sheet.

To reduce the risk of burns, fire, electric
shock or injury to persons:
1. Close supervision is necessary when 

this appliance is used by, on, or near children
or invalids.

2. Use this Shaper for its intended household

use as described in this manual. Do not use
attachments not recommended by Philips
Electronics North America Corporation.

3. Never operate this Shaper if it has a

damaged cord or plug, if it is not working
properly, if it has been dropped, damaged, or
dropped into water. Return the Shaper to an
Authorized Norelco Service Location for
examination and repair.

4. Keep the Shaper and cord away from heated

surfaces.

5. Never drop or insert any object into any

opening.

6. Do not operate, charge or plug in Shaper

outdoors or where aerosol (spray) products
are being used or where oxygen is being
administered.

7. Do not use this Shaper with a damaged or

broken specialty Hi-Definition Trimmer or
mini-foil, as facial injury may occur.

8. Always attach plug to Shaper first, then to

outlet.To disconnect, turn on/off switch to
“OFF” position (switch is down), then
remove plug from outlet.

9. To prevent possible damage to the cord, do

not wrap cord around the Shaper.

10.Never put Shaper in direct sunlight or store

at a temperature above 140°F.

11.This Shaper is for use on human facial hair

only. Do not use this Shaper for any other
purpose.

12.Always store your Shaper and adaptor in a

moisture-free area. Make sure the cord is
disconnected from the Shaper.

Put it to the test. Like many new products,
your Norelco D-Finer Precise Shaper may take
a little getting used to. So take the time to get
acquainted with the two-step shaping and
finishing process. Use the narrow specialty Hi-
Definition Trimmer to shape your beard, even
in the smallest areas. Then follow-up with the
narrow shaving mini-foil to shave along the
edges and eliminate any stubble to create a
smooth and clean contoured beard line.

Use the D-Finer Precise Shaper in addition to
your beard trimmer and razor to create and
maintain the beard shape that defines your
personal style.The unique ergonomic design
makes it easy to see exactly what you’re doing
so you get precisely the look you want.

Preparing your beard for shaping

Follow these steps to prepare your beard.

Use a Norelco beard and
moustache trimmer to
trim your beard (Fig.3).

Use a Norelco razor to
shave larger areas of the
skin (Fig.4).

Now you can shape and define your facial hair
style.

Use the D-Finer Precise Shaper on a clean, dry
face. Do not use any type of lotion or cream
before using.

Use the Precise Shaper only for its intended
household use as described in this manual.

Slide the specialty Hi-
Definition Trimmer  out
until you hear a “click”
and the Hi-Definition
Trimmer snaps into
position.You will see the
slide-out mark (Fig. 5).

The slide-out mark is hidden underneath the
specialty Hi-Definition Trimmer and only
becomes visible when the specialty Hi-
Definition Trimmer has been slid out correctly
and “clicks” into position.

Switch the D-Finer Precise Shaper ON.

Shape the contours of your beard and
sideburns with the specialty Hi-Definition
Trimmer.

To contour most

effectively, place the flat
surface of the specialty Hi-
Definition Trimmer  in
contact with the skin and
move it against the
direction of hair growth
(Fig. 6).

Make well-controlled movements. Touch
the hair lightly with the specialty Hi-
Definition Trimmer.

NOTE: Since all hairs do not grow in the same
direction, you may want to try different
contouring positions (i.e., upwards,
downwards, or across). Practice is best for
optimum results.

For additional styles and defining tips, visit our
website: www.norelco.com/d-finer.

When you have created your desired beard
contour, slide the specialty Hi-Definition
Trimmer back down to its original position.

Finally, use the narrow
shaving mini-foil to shave
along the contour edges to
remove any stubble while
creating a smooth clean
beard line (Fig. 7).

Before using mini-foil, always check mini-foil
for wear or damage. If mini-foil shows signs of
wear or damage, do not use shaver as injury
may occur. Do not use until mini-foil has been
replaced.

1

5

4

3

2

1

2

1

Gently press the shaving mini-foil to the skin.
Do not press too hard.

To maintain a shape, use the shaving mini-foil
to shave along the edges to provide a smooth
and clean beard line.

Switch the D-Finer Shaper OFF. Put on
the protective shaving head cap to
protect the specialty Hi-Definition
Trimmer and the shaving mini-foil.

◗ Always switch D-Finer Precise Shaper off

before cleaning.

◗ Do not use abrasives, scourers or liquids such

as alcohol, benzene, bleach or acetone to
clean the D-Finer Shaper.

◗ Never clean the specialty Hi-Definition

Trimmer or shaving mini-foil with the motor
ON.

◗ Do not apply pressure to specialty Hi-

Definition Trimmer or shaving mini-foil. Do
not touch specialty Hi-Definition Trimmer or
shaving mini-foil with hard objects as this may
damage them.

◗ Do not use while bathing, showering or

immerse the D-Finer in water or other liquids
as damage to D-Finer Shaper may occur.

◗ Clean cut hairs from D-Finer Shaper as they

accumulate during use.

◗ Always clean D-Finer Shaper after each use

and before storing.

Make sure D-Finer Shaper is switched
OFF and disconnected from the electrical
outlet.

Make sure the specialty Hi-Definition
Trimmer is down in its original position.

Remove the removable
shaving head by pulling it
off the D-Finer body 
(Fig. 8).

Shake or blow cut hairs from the shaving
head. Carefully clean the cutting unit and
the shaving head and body of the D-Finer
Shaper with the brush supplied.

Important: Do not clean the shaving mini-
foil with the brush. The brush may damage the
shaving mini-foil.

Put on the protective
shaving head cap to
protect the specialty Hi-
Definition Trimmer and the
shaving mini-foil (Fig. 9).

If the shaving mini-foil is worn or damaged, do
not continue using the appliance. Replace the
shaving mini-foil immediately.

A worn or damaged shaving mini-foil should
only be replaced with an original Philips
shaving mini-foil, which is available at an
authorized Norelco Service Location.

Remove the detachable
shaving head by pulling it
from the appliance (fig. 10).

Remove the shaving mini-
foil by pushing it out of the
shaving head (fig. 11).

Place the new shaving mini-
foil carefully in the shaving
head (fig. 12).

When the shaving mini-foil

is properly positioned,
push it into its end
position with your finger
(fig. 13).

The mini-foil cutter is located under the
detachable shaving head.

Do not switch the appliance on when replacing the

mini-foil cutter.

4

3

2

1

5

4

3

2

1

2

If the mini-foil cutter is worn or damaged, do
not continue using the appliance. Replace the
mini-foil cutter and the shaving mini-foil
immediately.

A worn or damaged mini-foil cutter should
only be replaced with an original Philips cutter,
which is available at an authorized Norelco
Service Location.

Remove the detachable
shaving head by pulling it
from the Shaper (fig. 14)

Remove the old mini-foil
cutter by pulling it from the
appliance (fig. 15).

Make sure that the spring within the
driving unit does not get lost.

Insert the new mini-foil
cutter carefully into the
driving unit (fig. 16).

When the mini-foil cutter

is properly positioned,
push it into its end
position with your finger
(fig. 17).

Replace the detachable shaving head on
the Shaper.

This shaper has no other user-serviceable parts. Any
other service should be performed by an Authorized
Norelco Service Location.

For assistance or the Authorized Norelco
Service Location nearest you, call toll free:

1-800-243-3050 
or for live help online visit our website:
www.norelco.com

Authorized Norelco Service Location
information is available 24 hours a day, 7 days a
week.

◗ This Norelco D-Finer Shaper contains a

rechargeable Nickel-Cadmium battery, which
must be disposed of properly.

◗ Battery should only be removed when D-

Finer Shaper is to be discarded.

◗ Refer to Battery Removal instruction sheet for

directions on removing the rechargeable
battery.

6

5

4

3

2

1

14

4203.000.5253.2.qxd  5/2/03  4:44 PM  Page 1