Philips ftr9965-69s User Manual
16
16
16
Two special adaptors (scart to cinch) are provided with your TV.
Connect the adaptor marked
Connect the adaptor marked
EXTERNAL 1
to the scart
EXTERNAL 3
or
4
.
Connect the adaptor (with the
IN/OUT
switch) marked
EXTERNAL 2
to the scart
EXTERNAL 1, 2
or
5
.
Note: -
EXTERNAL 2
only has
S-VIDEO
input (no output).
- In case of a (unstable) black bar at the right side of the picture, use the cursor left/right to shift horizontally.
- The low quality of some digital picture material may be the cause of digital image distortion. According to
- The low quality of some digital picture material may be the cause of digital image distortion. According to
the connected digital equipment, select
DVD
,
Game
,
SAT
or
Digital STB
in the Setup/Source menu. (In case
the digital transmission is still poor, select the
SOFT Smart Picture
setting without changing the picture
setting manually.)
Recorder
(
VCR
-
DVD
+
RW
)
Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals out of the
display. Keep a minimum distance of 0,5 m to the screen.
display. Keep a minimum distance of 0,5 m to the screen.
Connect the aerial cables 1, 2 and, to obtain the optimum
picture quality, eurocable 3 as shown.
If your recorder does not have a euroconnector, the only possible
connection is via the aerial cable.You will therefore need to tune
in your recorder’s test signal and assign it programme number 0
or store the test signal under a programme number between 90
and 99, see Manual installation, p. 6.
See the handbook of your recorder.
picture quality, eurocable 3 as shown.
If your recorder does not have a euroconnector, the only possible
connection is via the aerial cable.You will therefore need to tune
in your recorder’s test signal and assign it programme number 0
or store the test signal under a programme number between 90
and 99, see Manual installation, p. 6.
See the handbook of your recorder.
Decoder and Recorder
Connect a eurocable 4 to your decoder and to the special
euroconnector of your recorder. See also the recorder handbook.
You can also connect your decoder directly to
euroconnector of your recorder. See also the recorder handbook.
You can also connect your decoder directly to
EXT1
or
2
with a
eurocable.
Other equipment
(satellite receiver, decoder, DVD, games, etc.) with euroconnector
& Connect the aerial cables 1, 2 and 3 as shown (only if your
peripheral has TV aerial in-/output).
Connect your equipment with a eurocable 4 or 5 to one of
the euroconnectors
Connect your equipment with a eurocable 4 or 5 to one of
the euroconnectors
EXT1
,
2, 3
or
4
to obtain a better picture
quality.
é Look for the test signal of your peripheral in the same way as you
do for a recorder.
“ Make a selection in the Setup, Source menu, p. 9.
DVD player
With Component Video Output Connectors
(EXTERNAL 5)
(EXTERNAL 5)
&Connect the three separate component video cables to the DVD
player’s Y, U (Pb) and V (Pr) jacks and to the Y, Pb and Pr jacks
on the receiver.
on the receiver.
éConnect the audio cable to the DVD player’s audio L and R jacks
and to the L and R audio EXTERNAL 5 jacks on the receiver.
VCR 1
DECODER
CABLE
1
4
EXTERNAL
2
2
3
EXTERNAL
2
1
VCR 1
CABLE
≈
1
5
2
4
3
2
1
DVD
OUT
EXTERNAL
5
L
R
V
U
Y
RECORDER
RECORDER
Connect Peripheral Equipment
1033.1 en 29-04-2003 19:32 Pagina 16