Philips ipf146-05b User Manual

33

Der Anrufbeantworter

Remote control

You can also control the answering machine functions on your
fax from any telephone using tone dialling. Before you can use
remote control you have to enter an access code in function 52
(this code will also be used for function 55 Forwarding).

Preparing your fax machine for remote ac-

cess

1 Select MENU 52 and press OK.
2 Enter a four digit code.
3 Press OK. The code is now stored.

Remote access of the answering device

1 If you want to listen to the messages recorded from another

telephone, call your fax machine and wait for the answering
machine to play the message.

2 Enter the four-digit code. The outgoing message will be

interrupted and you will hear a confirmation tone. The new
messages will be played back. If no new messages have been
recorded, you will hear a second confirmation tone.

3 Then you can enter  commands as usual or terminate the

remote control by replacing the handset.

Overview of commands

1 The message you are just listening to will be repeated.

2 Your messages will be played back.

3 Move to the next message.

4 Record a new outgoing message. If you press 4 again after

two confirmation tones, you will hear a long confirmation
tone. Record the new outgoing message and finish with 4.

5 The current outgoing message will be replayed.

6 The current message will be deleted. If you press 6 after

having listened to all messages, all messages will be deleted.
In both cases you will hear a confirmation tone after the first
time you press the key. Press 6 again within five seconds to
execute the deleting command.

7 Switch answering machine off.

8 The current command will be interrupted.

9 Switch answering machine on.