Philips lx7500r-01 User Manual

– Disconnect the headphones.
– Switch on the selected source or select another source.

– Set the TV to the correct video channel for the selected source.

In a Scart chain: Problems seeing/hearing – Switch any other equipment in the Scart chain to standby.
the correct video source

If that does not help, also switch the equipment you want to see/hear to
standby. Next, switch it on again.

– Make sure the TV set is properly adjusted.

– Make sure the disc is not dirty. Clean the disc.
– Sometimes the picture may be temporarily distorted.This is not a defect of 

your DVD recorder system.

– The TV system of the inserted disc does not match the TV system of your TV 

(PAL/NTSC).

– Select RGB + CVBS in the the system menu. See t Picture

➜

output on page 47.

– Check your aerial.

– Change the TV system (see “TV system” on page 52)

– Connect the supplied subwoofer.

– Check if the speaker is connected properly.
– Check if the speaker cable is damaged.

– Press SURR repeatedly to select another surround effect.

– Make sure you have connected all speakers.
– Make sure you have selected Yes for Centre connected and Rear

connected in the menu Installation

➜

➜

Speaker setup.

See “Speaker setup” on page 55.

– Check if the inserted disc or the selected appliance supports digital 

surround sound.

– Check if the selected external equipment is connected to IN DIGITAL or

IN OPTICAL on the DVD recorder system.

– Switch the digital output of the connected equipment to PCM.

– Check if the setting for the digital output is correct. See “Digital output

setting” on page 55.

– Switch the DVD recorder system from Progressive Scan to Interlaced

(see “Component video output” on page 47) or 

use the Scart connection.

61