Philips mc-320-21t User Manual

MC-320/22-1

14

Select 

TUNER source.

➜ TUNER is displayed briefly.

Press 

BAND (or DISPLAY on remote control)

once or more to select your waveband (FM/
MW/ LW).

Press down 

TUNE 

 or 

 and release

button.
➜ The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: 

SEARCH.

➜ If a FM station is received in stereo, 

 is

shown.

Repeat step 

3 if necessary until you find the

desired station.

● To tune to a weak station, press TUNE   or

 briefly and repeatedly until you have found

optimal reception.

You can store up to a total of 40 radio stations
in the memory.

Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only program
stations which are not in the memory already.

Press 

PRESET 

 or 

 to select the preset

number where programming should start.

Press 

PROG / REV (PROGRAM on remote

control) for more than 2 seconds to activate
programming.
➜ AUTO is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by MW, LW.  The last
preset automatically stored will then be played.

Tune to your desired station (see “Tuning to
radio stations”).

Press 

PROG / REV (PROGRAM on remote

control) to activate programming.

Press 

PRESET 

 or 

 to allocate a number

from 1 to 40 to this station.

Press 

PROG / REV (PROGRAM on remote

control) again to confirm the setting.
➜ The preset number and the frequency of the
preset station are shown.

Repeat the above four steps to store other
stations.

● You can override a preset station by storing

another frequency in its place.