Philips mcd280-21m User Manual
32
English
Tape Operation/Recording
Preparation for recording
1
Select TAPE source.
2
Load a recordable tape into the tape deck with
the full spool to the left.
the full spool to the left.
3
Prepare the source to be recorded.
CD/VCD – load the disc.
TUNER – tune to the desired radio station.
AUX – connect external equipment.
CD/VCD – load the disc.
TUNER – tune to the desired radio station.
AUX – connect external equipment.
When recording is in progress
➜
REC
is shown.
●
To stop recording, press
9.
●
It is not possible to listen to another source.
●
It is not possible to activate the timer function.
Synchro start CD recording
1
Select CD source.
●
You can programme the tracks in the order you
want them to be recorded (refer to “CD/MP3-
CD Operations - Programming the disc tracks”).
want them to be recorded (refer to “CD/MP3-
CD Operations - Programming the disc tracks”).
2
Press REC to start recording.
➜
Playing of the CD programme starts
automatically from the beginning of the CD
after 7 seconds. It is not necessary to start the
CD player separately.
after 7 seconds. It is not necessary to start the
CD player separately.
One touch recording
1
Select VCD/CD, TUNER or AUX source.
2
If necessary, start playback of the selected
source.
source.
3
Press REC to start recording.
Recording timer
To record from the radio, you will need to use a
preset radio station and to set a start (ON) and
finish (OFF) time.
finish (OFF) time.
1
Select the preset radio station to record from
(refer to “Radio Reception - Tuning to preset
radio stations”).
(refer to “Radio Reception - Tuning to preset
radio stations”).
2
In standby mode, press TIMER SET for more
than two seconds.
than two seconds.
➜
The current selected source is displayed.
3
Press SOURCE repeatedly until “
REC TUN”
source is displayed.
4
Press TIMER SET to confirm the source.
➜
“
SET ON TIME” is displayed and the clock
digits for the hours flash.
5
Press VOLUME +/-
to set the hours.
6
Press TIMER SET again.
➜
The clock digits for the minutes flash.
7
Press VOLUME +/- to set the minutes.
8
Press TIMER SET to confirm the recording
start time.
start time.
➜
“
SET OFF TIME” is displayed and the clock
digits for the hours flash.
9
Repeat steps 5-7 to set the finish time.
0
Press TIMER SET to confirm the timer
settings.
settings.
➜
is shown and the recording timer is now
set.
Note:
– The recording timer will not be activated if the
system is in tape play mode.
– The recording timer will not be activated if the
system is in tape play mode.