Philips mcd280-21m ユーザーズマニュアル

32

1

Select TAPE source.

2

Load a recordable tape into the tape deck with
the full spool to the left.

3

Prepare the source to be recorded.
CD/VCD – load the disc.
TUNER – tune to the desired radio station.
AUX – connect external equipment.

➜

 is shown.

●

To stop recording, press 

9.

●

It is not possible to listen to another source.

●

It is not possible to activate the timer function.

1

Select CD source.

●

You can programme the tracks in the order you
want them to be recorded (refer to “CD/MP3-
CD Operations - Programming the disc tracks”).

2

Press REC to start recording.

➜

Playing of the CD programme starts

automatically from the beginning of the CD
after 7 seconds. It is not necessary to start the
CD player separately.

1

Select VCD/CD, TUNER or AUX  source.

2

If necessary, start playback of the selected
source.

3

Press REC to start recording.

To record from the radio, you will need to use a

preset radio station and to set a start (ON) and
finish (OFF) time.

1

Select the preset radio station to record from
(refer to “Radio Reception - Tuning to preset
radio stations”).

2

In standby mode, press TIMER SET  for more
than two seconds.

➜

The current selected source is displayed.

3

Press SOURCE repeatedly until “

REC TUN”

source is displayed.

4

Press TIMER SET to confirm the source.

➜

“

SET ON TIME” is displayed and the clock

digits for the hours flash.

5

Press VOLUME +/-

  to set the hours.

6

Press TIMER SET again.

➜

The clock digits for the minutes flash.

7

Press VOLUME +/- to set the minutes.

8

Press TIMER SET to confirm the recording
start time.

➜

“

SET OFF TIME” is displayed and the clock

digits for the hours flash.

9

Repeat steps 5-7 to set the finish time.

0

Press TIMER SET to confirm the timer
settings.

➜

 is shown and the recording timer is now

set.