In order to reduce the risk of interference, place the base station at least 1m away from any other
electrical appliance (telephone, television, computer, etc.)
The base station should be placed on a flat surface.
The base station should not be kept in a damp room, near a heat source or close to obstacles such
as thick walls or metallic structures.

Inserting/Replacing batteries

Your handset is powered by two rechargeable AA/R6 batteries.

Only

AA 600 mAh rechargeable batteries should be used as replacements.

Never use non rechargeable batteries.

1. Slide down the cover

2. Insert batteries following the diagram.

on the back of the telephone.

3. Close the cover.

Telephone connection

On the bottom of the base station:
1. Connect the power supply (B) into the base station then

plug the power adaptor into the easily accessible wall
socket.

2. Connect the telephone cord (A) to the base station and

then to the PTT wall socket.

Place the handset on the base station (charging unit).

Charging/Recharging the telephone

While the batteries are being charged,

flashes on the screen and shows

When the battery icon on the display shows

, the batteries are fully charged.

You will hear a validation beep when you place the handset on the base station.
On first use or when new batteries have been inserted, charge the batteries for at least 24 hours.
You will hear a beep when you activate the telephone if the batteries need to be charged.

Telephone range

Your telephone has a range of : 50m indoors - 350m outdoors.
The

symbol on the display indicates that the handset is connected on the base station.

Installing another KALA 200 handset

You can register up to 4 handsets with your base station (See Page 9 Programming options).
Additional handsets do not require additional telephone connections but do need a power
supply adaptor. The reference of Additional Kala 200 handsets is TD 6830.

PRESENTATION OF TELEPHONE AND ACCESSORIES

moves to the left, or displays the previous entry.

moves to the right, or displays the following entry.

validates the entry.

press: removes a character during entry. press and hold:
exit any mode (programming, phonebooks or lists).

Modes:
list of last incoming calls.

list of last numbers dialled (redial key).

program the telephone.

Mains adapter

User guide

Programming

key

Redial

list key

Incoming

call log

key

Earpiece

The batteries contain Cadmium and must be disposed of in compliance with the waste dis-
posal regulations. Never use non-rechargeable batteries.

The manufacturer assumes no responsibility for non-respect of these regulations.

The crossed-out dustbin signifies that the battery should not be disposed of with gener-
al household waste.

Batteries

Family

phonebook

key

Friends

phonebook

key

Talk key

To make

an external call,

end an external

call, and answer

an external call.

To call all internal

handsets recognised

by the base station or

put a call on hold

(with hold music).

(“internal call” key).

Earpiece

volume

adjustment

How to optimise batteries lifespan
If you plan not to use your phone for at least 15 days, we would suggest you to

remove the batteries from the handset if you disconnect the mains power.

The handset may also be placed
on the base station with the key-
pad face-up.

The key located

on the base sta-

tion side can be

used to make all

handsets ring at

the same time.

Only use the power and telephone cables
supplied with the telephone.

Telephone cable

Functions keys:

When using your telphone,

3 beep types will

be heard:

• the error beep

• the validation beep ,

• the invitation beep

Beep indicators