Philips vox300 User Manual
10
EN
Installing the base station
Place your product close enough to the telephone and mains power sockets so that the
cables will reach. To properly install the base station, plug the line cord and the power
cable into the base station. Plug the cord and the cable into the wall. If you have a
broadband DSL Internet connection, please make sure you have one DSL filter plugged
directly on each line socket used in the house and check the modem and the phone are
plugged in the correct filter slot (one specific for each).
Please take care that the power supply and telephone line are connected to the correct
sockets as incorrect placement could damage your equipment.
1
Connect the telephone line cord delivered with the
product.
2
Connect the power supply.
Warning ! The electrical network is classified as hazardous according to criteria in
the standard EN 60-950. The only way to power down this product is to unplug the
power supply from the electrical outlet. Ensure the electrical outlet is located close
to the apparatus and is always easily accessible.
Warning ! Always use the line cable provided with the product otherwise you may
not have a dialling tone.
1
2
Installing the base station