Philips vox300 User Manual

Installing and replacing the batteries in the

handset

To insert the batteries, open the battery cover, place the batteries as

indicated and then replace the battery cover. When the battery icon is

blinking, charge is needed. Allow 24 hours for the batteries to fully charge.

On first use it may be necessary to wait for a few minutes before seeing

symbols on the display.

The warranty does not apply to the batteries and any other components

which have a limited lifetime or are exposed to wear.

Batteries should not be disposed of with general household waste.

Battery life and range

Optimal battery life is reached after 3 cycles of complete charging & discharging. When

reaching the range limit and the conversation becomes crackly, move closer to the base.

To reach optimal range, place the base station away from electrical appliances.

The GAP standard guarantees that all DECT

GAP handsets and base stations comply

with a minimum operating standard irrespective of their make. Your CD 135 handset and

base station are GAP compliant, which means the minimum guaranteed functions are :

available if you use another handset than a CD 135 with your base station.
To register and use your CD 135 handset with a GAP standard base station of a different

make, first follow the procedure described in the manufacturer’s instructions, then follow

the procedure described on page 31.

Battery life in talk

time

Battery life in

standby mode

Indoor range

Outdoor range

up to 12 hours

up to 150 hours

up to 50 metres

up to 300 metres

Using GAP standard compliance

Warning : the base station must always be plugged into the mains

when charging or when in use. Always use rechargeable batteries.

Warning ! Always use the line cable provided with the product

otherwise you may not have a dialling tone.

Installing the batteries