Philips vox300 User Manual

Page of 46
31
EN
To set or change an SOS number
The SOS number feature allows you to enter 3 SOS phone numbers, which can be dialed 
out although the call barring is activated. The maximum length of an SOS number is 4 
digits. The PIN code is required when modify the SOS number. 
1.
Press 
 and press Down 
 to reach ADVANCE SET.
2.
Press 
 and press Down 
 to reach SOS NUMBER.
3.
Press 
 and enter the PIN code 
 (by default the PIN code is 0000).
4.
Press 
, scroll 
 to select the SOS number location 12 or 3 and press 
.
5.
Enter the SOS number 
 (max. 4 digits) and press 
 to confirm.
To register a handset
Up to 5 handsets can be registered to the base station.
If you have inadvertently unregistered your handset, you can register it again. Additional 
handsets must be registered to the base before use.
To register a handset, first press the paging key 
 on the base for approx. 5 seconds 
when the base is in idle mode. Then carry out the following steps on the handset within 
one minute :
1.
Press 
 and press Down 
 to reach ADVANCE SET.
2.
Press 
 and press Down 
 to reach REGISTRATION.
3.
Press 
, enter the PIN code 
 (by default the PIN code is 0000) and press 
 to confirm.
If the registration was successfull, a long confirmation tone is heard and the handset 
number (1 to 5) will be assigned by the base automatically.
Warning : If you wish to register non Philips handsets to the CD 135 base station, 
make sure that this handset is GAP compliant otherwise it will not operate properly 
Advanced settings