Philips vr210 User Manual
— 11 —
1
Select Tuner Set Up Mode
1 Press
VCR
.
2 Press
MENU
.
3 Press
PLAY
5 or
STOP
∞ to select
“TUNER SET UP” then press
OK/
STATUS
.
4 Press
PLAY
5 or
STOP
∞ to select
“CHANGING TUNER SET UP”
then press
then press
OK/STATUS
.
The programmed channel informa-
tion list appears with the settings of
the tuned channel flashing. (You can
also watch the picture of the tuned
channel since the list and the picture
alternates on the TV.)
tion list appears with the settings of
the tuned channel flashing. (You can
also watch the picture of the tuned
channel since the list and the picture
alternates on the TV.)
2
Select Station
1 Press
PLAY
5 or
STOP
∞ until an
open channel in
which you want to
store a new chan-
nel starts flashing then press
which you want to
store a new chan-
nel starts flashing then press
OK/
STATUS
.
2 Press
PLAY
5 or
STOP
∞ to select
the search starting band.
VHF L: Starts searching from the
VHF L band.
VHF H: Starts searching from the
VHF H band.
UHF:
Starts searching from the
UHF band.
UHF band.
3 Press
OK/STATUS
.
Searching starts,
and when a station
is tuned in, search-
ing stops and the
tuned frequency is
shown on the TV.
Then the following menu appears.
and when a station
is tuned in, search-
ing stops and the
tuned frequency is
shown on the TV.
Then the following menu appears.
3
Store Channel
Press
PLAY
5 or
STOP
∞ to select
“STORE CHANNEL” then press
OK/STATUS
.
The programmed channel information
list appears again with the settings of
the newly tuned channel flashing.
list appears again with the settings of
the newly tuned channel flashing.
• If you do not want to store this station,
select “CONTINUE SEARCH” then
press
press
OK/STATUS
, searching starts
again.
4
Finish Setting
Press
MENU
.
VHF L
VHF H
UHF
VHF H
UHF
SELECT: CONFIRM: OK
END: MENU
If no sound comes out
You need to change the TV system for
this particular channel.
this particular channel.
EX. Change the TV system for
channel 3
channel 3
1 Press
VCR
.
2 Press
MENU
.
3 Press
PLAY
5 or
STOP
∞ to select
“TUNER SET UP” then press
OK/STATUS
.
4 Press
PLAY
5 or
STOP
∞ to select
“CHANGING TUNER SET UP”
then press
then press
OK/STATUS
.
5 Press
PLAY
5 or
STOP
∞ until
information for channel 3 flashes.
6 Press
OK/STATUS
three times.
Only TV system indication for
channel 3 starts flashing.
channel 3 starts flashing.
7 Press
PLAY
5 or
STOP
∞ to select
the appropriate TV system [(BG,
DK, I)] so that sound comes out.
DK, I)] so that sound comes out.
8 Press
OK/STATUS
to store the
setting.
9 Press
MENU
to exit from the menu
operations.
If you need to do the auto
programming again
programming again
If you move to another place, you may
need to tune the VCR tuner again for
your new residential area.
need to tune the VCR tuner again for
your new residential area.
1 Press
VCR
.
2 Press
MENU
.
3 Press
PLAY
5 or
STOP
∞ to select
“TUNER SET UP” then press
OK/STATUS
.
4 Press
PLAY
5 or
STOP
∞ to select
“AUTO TUNER SET UP” then
OK/STATUS
.
5 Press
PLAY
5 or
STOP
∞ to select
the appropriate TV system [(BG,
DK, I)] of your residential area.
DK, I)] of your residential area.
6 Press
OK/STATUS
.
Auto programming starts.
When it ends, programmed channels,
frequencies and TV systems are
shown on the display.
When it ends, programmed channels,
frequencies and TV systems are
shown on the display.
7 Press
MENU
to exit from the menu
operations.
The Tuner Set Up menu appears.
The Tuner Set Up menu appears.
Manual Channel Setting
When you want to do channel setting
manually, follow this procedure.
manually, follow this procedure.
STORE CHANNEL
CONTINUE SEARCH
SELECT:
CONFIRM: OK
END: MENU
Selecting Colour Mode
Before using the VCR, you need to set
the colour mode both for recording and
playback.
the colour mode both for recording and
playback.
Press
COLOUR MODE
on the front
panel for more than 2 seconds. The
current setting will appear on the
screen for about 5 seconds. While the
current setting appears, press
current setting will appear on the
screen for about 5 seconds. While the
current setting appears, press
COL-
OUR MODE
repeatedly, the setting
changes as follows.
For recording:
AUTO: Normally select this mode.
The colour system is
automatically detected.
automatically detected.
NTSC3.58: Select this mode if
“AUTO” does not work well
when recording the NTSC
signals. (For playback on an
NTSC TV)
when recording the NTSC
signals. (For playback on an
NTSC TV)
NTSC4.43: Select this mode if
“AUTO” does not work well
when recording the NTSC
signals on the PAL TV. (For
playback on a PAL TV)
when recording the NTSC
signals on the PAL TV. (For
playback on a PAL TV)
PAL:
Select this mode if “AUTO”
does not work well when
recording the PAL signals.
does not work well when
recording the PAL signals.
MESECAM: Select this mode if
“AUTO” does not work well
when recording the SECAM
signals.
when recording the SECAM
signals.
For playback:
AUTO: Normally select this mode.
When you watch a PAL,
NTSC or MESECAM tape,
the colour system is
automatically detected.
NTSC or MESECAM tape,
the colour system is
automatically detected.
NTSC3.58: Select this mode when
you watch an NTSC3.58
tape on an NTSC TV.
tape on an NTSC TV.
NTSC4.43: Select this mode when
you watch an NTSC4.43
tape on a PAL TV.
tape on a PAL TV.
NTSC
=
=
=
=
=PAL TV: Select this mode
when you watch an
NTSC3.58 tape on a PAL
TV.
NTSC3.58 tape on a PAL
TV.
PAL:
Select this mode if “AUTO”
does not work well when
playing back a PAL tape.
does not work well when
playing back a PAL tape.
MESECAM: Select this mode if
“AUTO” does not work well
when playing back a
MESECAM tape.
when playing back a
MESECAM tape.
When playing back an NTSC tape with
“AUTO” mode selected
The tape is played back using “NTSC3.58”
mode.
“AUTO” mode selected
The tape is played back using “NTSC3.58”
mode.
vr210/410/55
00.3.6, 1:09 PM
11