Philips vr210 User Manual
— 10 —
S
ETTING
U
P
(C
ONTINUED
)
To change the language
manually
manually
You can also change the language
manually.
manually.
1 Press
VCR
.
2 Press
MENU
.
3 Press
PLAY
5 or
STOP
∞ to select
“INITIAL SET UP” then press
OK/STATUS
.
The Initial Set Up menu appears.
4 Press
PLAY
5 or
STOP
∞ to select
“LANGUAGE.”
5 Press
FF
3 to select the language
on the TV screen.
Each time you press the button, the
language changes as follows:
Each time you press the button, the
language changes as follows:
English
=
6 Press
MENU
to exit from the menu
operations.
If you want to delete
unwanted channels
unwanted channels
You can delete channels manually.
After you have deleted the channels,
they will be not selected by pressing
After you have deleted the channels,
they will be not selected by pressing
CH
5/∞.
1 Press
VCR
.
2 Press
MENU
.
3 Press
PLAY
5 or
STOP
∞ to select
“TUNER SET UP” then press
OK/STATUS
.
4 Press
PLAY
5 or
STOP
∞ to select
“CHANGING
TUNER SET UP”
then press
TUNER SET UP”
then press
OK/STATUS
.
The programmed channel informa-
tion list appears with the settings of
the tuned channel flashing. (You can
also watch the picture of the tuned
channel since the list and the picture
alternates on the TV.)
tion list appears with the settings of
the tuned channel flashing. (You can
also watch the picture of the tuned
channel since the list and the picture
alternates on the TV.)
5 Press
PLAY
5 or
STOP
∞ until an
unwanted channel setting flashes.
6 Press
CLEAR
to delete the unwanted
channel.
• If you have accidentally deleted a
channel, press
REW
2.
7 Repeat steps 5 and 6 until you delete
all unwanted channels.
8 Press
MENU
to exit from the menu
operations.
When the auto programming is
completed
The following message appears on the
TV, and the lowest channel will be
tuned in.
completed
The following message appears on the
TV, and the lowest channel will be
tuned in.
Now you have finished the initial set up
procedure.
procedure.
If you stop the initial setup procedure while
it is proceeding:
The VCR enters the initial setup mode again
the next time you turn on the VCR.
it is proceeding:
The VCR enters the initial setup mode again
the next time you turn on the VCR.
Initial setup will not start in the following
cases:
• If there is a tape inserted.
• If any one of the initial setup procedures
cases:
• If there is a tape inserted.
• If any one of the initial setup procedures
is finished manually.
To reset the clock manually
You can also reset or correct the clock
manually.
manually.
1 Press
VCR
.
2 Press
MENU
.
3 Press
PLAY
5 or
STOP
∞ to select
“INITIAL SET UP” then press
OK/STATUS
.
The Initial Set Up menu appears.
4 Press
PLAY
5 or
STOP
∞ to select
“SET CLOCK” then press
OK/STATUS.
5 Press
PLAY
5 or
STOP
∞ to set the
time, then press
OK/STATUS
.
• Each time you press
PLAY
5 or
STOP
∞, the set time changes by 1-
minute intervals. If you hold the
button, the set time changes by 30-
minute intervals.
button, the set time changes by 30-
minute intervals.
6 Press
PLAY
5 or
STOP
∞ to set the
day and month, then press
OK/
STATUS
.
• Each time you press
PLAY
5 or
STOP
∞, the set date changes by 1-
day intervals. If you hold the button,
the set date changes by 15-day
intervals.
the set date changes by 15-day
intervals.
7 Press
PLAY
5 or
STOP
∞ to set the
year, then press
OK/STATUS
.
• Each time you press
PLAY
5 or
STOP
∞, the set year changes by 1-
year intervals. If you hold the button,
the set year changes rapidly.
the set year changes rapidly.
8 Press
MENU
to exit from the menu
operations.
Note:
If a power failure occurs, clock will lose its
setting.
If a power failure occurs, clock will lose its
setting.
AUTO CH.SET COMPLETED
If you want to exchange the
channel positions
channel positions
You can also replace the channel
position numbers.
position numbers.
EX. Replace channel 9 and channel 3
1 Press
VCR
.
2 Press
MENU
.
3 Press
PLAY
5 or
STOP
∞ to select
“TUNER SET UP” then press
OK/STATUS
.
4 Press
PLAY
5 or
STOP
∞ to select
“CHANGING TUNER SET UP”
then press
then press
OK/STATUS
.
5 Press
PLAY
5 or
STOP
∞ until
information for channel 3 flashes.
6 Press
OK/STATUS
once.
Only channel indication for channel
3 starts flashing.
3 starts flashing.
7 Press
0
then
9
.
The channel settings for channel 3
and 9 are exchanged.
and 9 are exchanged.
• If you have accidentally deleted a
channel, press
REW
2.
8 Press
OK/STATUS
to store the
setting.
9 Press
MENU
to exit from the menu
operations.
If the picture is not clear
You need to fine-tune this particular
channel.
channel.
EX. Fine-tune channel 3
1 Press
VCR
.
2 Press
MENU
.
3 Press
PLAY
5 or
STOP
∞ to select
“TUNER SET UP” then press
OK/STATUS
.
4 Press
PLAY
5 or
STOP
∞ to select
“CHANGING TUNER SET UP”
then press
then press
OK/STATUS
.
5 Press
PLAY
5 or
STOP
∞ until
information for channel 3 flashes.
6 Press
OK/STATUS
twice.
Only frequency indication for
channel 3 starts flashing.
channel 3 starts flashing.
7 Press
PLAY
5 or
STOP
∞ to fine-
tune the station until you get the best
possible picture.
possible picture.
8 Press
OK/STATUS
to store the
setting.
9 Press
MENU
to exit from the menu
operations.
CH FRQ SYS CH FRQ SYS
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 195 BG 09 355 BG
04 205 BG 10 365 BG
05 213 BG 11 374 BG
06 221 BG 12 384 BG
SELECT:
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 195 BG 09 355 BG
04 205 BG 10 365 BG
05 213 BG 11 374 BG
06 221 BG 12 384 BG
SELECT:
∞
DELETE: CLEAR
CHANGE CH: OK
END: MENU
END: MENU
vr210/410/55
00.3.6, 1:08 PM
10