Pfaff smart 200c User Manual

19

Attention: Turn power switch to off (“O”) 
before inserting or removing the bobbin. 

1.  Remove bobbin cover. Insert the bobbin 

in the bobbin case with the thread running 
in a counterclockwise direction (arrow).

2.  Pull the thread through the slit (A).

3.  Pull the thread toward the left and along 

the inside of the spring until it slips into 
the notch (B) being sure that the thread 
does not slip out of the slit (A).

4.  Pull out about 15 cm (6 inches) of thread 

and slide on the bobbin cover (C).