Pfaff smart 200c User Manual

21

4.  Thread the tension discs by pulling the thread down 

between the silver discs.

5.  Then, down and around the check spring holder and 

back up to the take up lever.

6.  Pull the thread from right to the left through the slotted 

eye of the take-up lever and then down again.

7.  Pass the thread behind the fl at, horizontal thread 

guide.

8.  Guide the thread into the wire loop.

9.  Thread the end of the thread through the needle from 

front to back, and pull out about 10 cm of thread. Or 
use the needle threader to thread the needle. (On the 
next page).